a a c2 c1 b b for this p art order : bmp18w6moeloooo shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fotoooo shown with fc116n2 and fc4008 contacts schema tic 4 bmp series contacts ?arge surface area contact mating system high reliability ?losed entry?design precision machined solid copper alloy size 16 contacts current -tempera ture dera ting cur ve size 16 and size 8 contacts under load (tested per iec publication 512-3, test 5b) size 16 and size 8 contacts under load (tested per iec publication 512-3, test 5a) tempera ture rise cur ve all contacts of the bmp-series connector family utilize the ?arge surface area (l.s.a.) contact mating system.?the ?.s.a. contact mating system?insures the lowest level of con- tact resistance during mechanical endurance tests of 500 coupling cycles or more. contact insertion/withdrawal forces remain substantially the same during the life of the connector. the bmp-series connectors use only ?losed entry?design female contacts. the ?losed entry?design prevents probe damage to the female contacts, and will not allow the female contact to accept misaligned or bent male con- tacts. all bmp-series contacts are precision machined from solid copper alloy barstock. they are durable, smooth in construction, and have greater amperage capacities than hollow, sheet metal style contacts. the bmp-series contact, having a large con- tact surface area, produces less heat at the con- tact surface, thereby permitting the connector to operate at high amperage levels continuously, and still maintain lower connector temperatures. spring retention member provides uniform retention of male contact when mated. female contact contact insulator retention clip large surface area contact mating surface a male contact section a - a enlarged spring retention member closed crimp barrel insulation grip inspection hole a the curves shown above were developed using twelve (12) size 16 mc116n and fc116n2 contacts with 16 awg (1.5 mm 2 ) size wire, and six (6) size 8 mc4008d-858.2 and fc4008d contacts with 10 awg (6 mm 2 ) size wire. current was applied through two separate circuits; 15 amperes was maintained through the size 16 mc116n and fc116n2 contacts and allowed to thermally sta- bilize while current through the size 8 mc4008d-858.2 and fc4008d contacts was increased from 0 to 40 amperes. 44 40 36 32 28 24 20 16 12 8 4 0 44 40 36 32 28 24 20 16 12 8 4 0 30 40 50 60 70 80 90 110 100 120 130 0 10 20 30 40 50 60 80 70 90 100 temperature rise (?) bmp connector rated current (amps) bmp connector rated current (amps) ambient temperature (?) bmp 18w6 mated connectors ordering information for bmp connectors bmp connectors are offered in four mounting styles. schematic 1 shows the bmp connector with no mounting hardware while schemat ic 2 illustrates the plug shell option. schematic 3 pictures a floating board mount option with a cable support (hood) while schematic 4 details a jackscrew option. use the indicated part numbers to order the desired bmp connector assembly. order the contacts based on the contact part number charts shown elsewhere on this brochure. contact the factory for ordering information on special indicated ?dditional options. a a 0.170[4.32] typ. b b 0.062[1.57] typ. 0.125[3.18] typ. for this p art order : bmp18w6f3700000 schema tic 1 for this p art order : bmp18w6m3700000 a b b a a e c2 c1 a e 1.665[42.29] 2.885[7.33] 0.719[18.26] 2.905[73.79] 0.719[18.26] 1.688[42.88] for this p art order : BMP18W6MOELPAOO shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fotraoo shown with fc116n2 and fc4008d contacts f a c1 b a d 1.627[41.33] 2.846[72.29] 2.930[74.42] 2.220[56.39] a c2 b g 0.750[19.05] 2.000[50.80] 3.875[98.43] 3.500[88.90] for this p art order : bmp18w6moooozo-1026.1 shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fothoofb-1026.0 shown with fc116n2 and fc4008d contacts a schema tic 2 schema tic 3 bmp series component descriptions description item a b c1 c2 d f g e male and female contacts, size 8 and 16. terminations are crimp, solder, and printed board straight solder. male and female connector insulators. may be used as a free or fixed connector. fixed jackscrews. rotating jackscrews. hood (cable adapter) provides cable support. mounting plate used to mount a fixed connector to a panel. float bushings. male and female shells (shrouds) protect contacts from damage. may also provide additional polarization combinations. additional options : coaxial contacts, size 16 solder termination contacts, and crimp tools coaxial contacts, and size 16 solder termination contacts are also offered for the bmp connectors. consult positronic s heavy-duty rectangular connector catalog and the factory for details. crimp tools are available from stock. other combinations of power and signal contacts are available on special order to satisfy special customer requirements. consult the factory for technical and ordering information. printed board mount terminations crimp contact terminations crimp contact terminations crimp contact terminations bmp master 6/3/02 10:50 am page 1
a a c2 c1 b b for this p art order : bmp18w6moeloooo shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fotoooo shown with fc116n2 and fc4008 contacts schema tic 4 bmp series contacts ?arge surface area contact mating system high reliability ?losed entry?design precision machined solid copper alloy size 16 contacts current -tempera ture dera ting cur ve size 16 and size 8 contacts under load (tested per iec publication 512-3, test 5b) size 16 and size 8 contacts under load (tested per iec publication 512-3, test 5a) tempera ture rise cur ve all contacts of the bmp-series connector family utilize the ?arge surface area (l.s.a.) contact mating system.?the ?.s.a. contact mating system?insures the lowest level of con- tact resistance during mechanical endurance tests of 500 coupling cycles or more. contact insertion/withdrawal forces remain substantially the same during the life of the connector. the bmp-series connectors use only ?losed entry?design female contacts. the ?losed entry?design prevents probe damage to the female contacts, and will not allow the female contact to accept misaligned or bent male con- tacts. all bmp-series contacts are precision machined from solid copper alloy barstock. they are durable, smooth in construction, and have greater amperage capacities than hollow, sheet metal style contacts. the bmp-series contact, having a large con- tact surface area, produces less heat at the con- tact surface, thereby permitting the connector to operate at high amperage levels continuously, and still maintain lower connector temperatures. spring retention member provides uniform retention of male contact when mated. female contact contact insulator retention clip large surface area contact mating surface a male contact section a - a enlarged spring retention member closed crimp barrel insulation grip inspection hole a the curves shown above were developed using twelve (12) size 16 mc116n and fc116n2 contacts with 16 awg (1.5 mm 2 ) size wire, and six (6) size 8 mc4008d-858.2 and fc4008d contacts with 10 awg (6 mm 2 ) size wire. current was applied through two separate circuits; 15 amperes was maintained through the size 16 mc116n and fc116n2 contacts and allowed to thermally sta- bilize while current through the size 8 mc4008d-858.2 and fc4008d contacts was increased from 0 to 40 amperes. 44 40 36 32 28 24 20 16 12 8 4 0 44 40 36 32 28 24 20 16 12 8 4 0 30 40 50 60 70 80 90 110 100 120 130 0 10 20 30 40 50 60 80 70 90 100 temperature rise (?) bmp connector rated current (amps) bmp connector rated current (amps) ambient temperature (?) bmp 18w6 mated connectors ordering information for bmp connectors bmp connectors are offered in four mounting styles. schematic 1 shows the bmp connector with no mounting hardware while schemat ic 2 illustrates the plug shell option. schematic 3 pictures a floating board mount option with a cable support (hood) while schematic 4 details a jackscrew option. use the indicated part numbers to order the desired bmp connector assembly. order the contacts based on the contact part number charts shown elsewhere on this brochure. contact the factory for ordering information on special indicated ?dditional options. a a 0.170[4.32] typ. b b 0.062[1.57] typ. 0.125[3.18] typ. for this p art order : bmp18w6f3700000 schema tic 1 for this p art order : bmp18w6m3700000 a b b a a e c2 c1 a e 1.665[42.29] 2.885[7.33] 0.719[18.26] 2.905[73.79] 0.719[18.26] 1.688[42.88] for this p art order : BMP18W6MOELPAOO shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fotraoo shown with fc116n2 and fc4008d contacts f a c1 b a d 1.627[41.33] 2.846[72.29] 2.930[74.42] 2.220[56.39] a c2 b g 0.750[19.05] 2.000[50.80] 3.875[98.43] 3.500[88.90] for this p art order : bmp18w6moooozo-1026.1 shown with mc116n and mc4008d-858.2 contacts for this p art order : bmp18w6fothoofb-1026.0 shown with fc116n2 and fc4008d contacts a schema tic 2 schema tic 3 bmp series component descriptions description item a b c1 c2 d f g e male and female contacts, size 8 and 16. terminations are crimp, solder, and printed board straight solder. male and female connector insulators. may be used as a free or fixed connector. fixed jackscrews. rotating jackscrews. hood (cable adapter) provides cable support. mounting plate used to mount a fixed connector to a panel. float bushings. male and female shells (shrouds) protect contacts from damage. may also provide additional polarization combinations. additional options : coaxial contacts, size 16 solder termination contacts, and crimp tools coaxial contacts, and size 16 solder termination contacts are also offered for the bmp connectors. consult positronic s heavy-duty rectangular connector catalog and the factory for details. crimp tools are available from stock. other combinations of power and signal contacts are available on special order to satisfy special customer requirements. consult the factory for technical and ordering information. printed board mount terminations crimp contact terminations crimp contact terminations crimp contact terminations bmp master 6/3/02 10:50 am page 1
positronic industries offers . . . bmp connectors for high voltage / high current and certain ?ot swap?applications materials and finishes: insulator: glass filled polyester, ul 94v-0. contacts: precision machined copper alloy with 0.000010 inch (0.25 microns) gold over nickel, or 0.000030 inch (0,8 microns) gold over nickel. hood: aluminium, yellow anodize. shell: aluminium, yellow anodize. mounting plate: aluminium, yellow anodize. electrical characteristics: connector contact current rating: see inside for performance curves. size 16 contact: 15 amperes nominal continuous, derated per iec 512-3, test 5b. size 8 contact: 40 amperes nominal continuous, derated per iec 512-3, test 5b. ?ot swap?for certain applications. initial contact resistance: size 16 contact: 0.003 ohms max., per iec 512-2, test 2b. size 8 contact: 0.005 ohms max., per iec 512-2, test 2b. insulation resistance: 5 g ohms per iec 512-2, test 3a, method a. voltage proof: 2000 vrms per iec 512-2, test 4a, method c. creepage distance: 0.157 inch (4 mm) minimum. clearance distance: 0.125 inch (3,2 mm) minimum. working temperature: -55? to +125?. working voltage: designed to meet ul 600vac and csa 600vac. mechanical characteristics: removable contacts: insert contact to rear face of insulator; release from front face of insulator. size 16 contact: male contact has a 0.062 inch (1,57 mm) diameter. female contact has ?losed entry?design for highest reliability and current carrying capacity. size 8 contact: male contact has a 0.142 inch (3,61 mm) diameter. female contact has ?losed entry?design for highest reliability and current carrying capacity. contact retention in insulator: size 16 contact: 15 lbs. (67n) per iec 512-8, test 15a. size 8 contact: 22 lbs. (98n) per iec 512-8, test 15a. contact terminations: crimp or solder removable contacts. size 8 contacts for wire sizes 8 to 16 awg. size 16 contacts for wire sizes 12 - 24 awg. straight dip solder printed board mount contacts optional, with 0.062 inch (1,57 mm) diameter for size 16 contacts and 0.125 inch (3,18 mm) diameter for size 8 contacts. contact insertion and withdrawal forces: size 16 contact: 8 oz. (2,2 n) nominal per contact. size 8 contact: 40 oz. (11n) nominal per contact. locking system: jackscrews. polarizations: provided in insulator design and polarized shell. mechanical operations: 500 operations per iec 512-5. blind mating: provided in insulator design, optional. technical characteristics an iso 9001 certified company positronic industries is pleased to present the bmp con- nector which is designed as a power interface connector for high voltage/high current applications. this connector is offered with four standard mounting options which allow for cable-to-cable and cable-to-panel connections. the bmp connector features positronic s ?arge surface area contact mating system, with high reliability ?losed entry?design female contacts. the bmp connector is also designed with raised bosses on the insulator which improve high voltage capabilities and prevent accidental operator exposure to live contacts. polarization and blind mating capabilities are options designed into the insulator of the bmp connector. contacts for the bmp connectors are sold separately. the standard contacts for bmp connectors are size 8 and size 16 crimp or solder removable contacts. contact combinations can handle 8 to 24 awg size wire. size 16 contacts are rated for 25 amperes per contact and size 8 contacts are rated for up to 40 amperes per contact. coaxial contacts are also available; con- sult the factory for special ordering information. positronic industries offers a full range of crimp tools for use with the bmp crimp contacts. consult positronic s heavy-duty rectangular connector catalog or the factory for additional tool- ing information. other combinations of power and signal contacts are avail- able on special order to satisfy special customer requirements. bmp series contact ordering information note: contacts are not supplied with the bmp-series connectors and must be ordered separately. size 16 crimp contacts size 8 removable power crimp contacts size 8 removable power solder contacts * female contact closed entry, l.s.a. male contact 0.766 (19,46) 0.766 (19,46) 0.062 (1,57) 0.250 (6,35) c b a 0.250 (6,35) 0.062 (1,57) b a 0.020 0.020 0.020 0.010 0.001 0.003 0.003 0.020 0.010 0.003 0.003 material: copper alloy. finish: 0.000010 (0,25 ) gold over nickel or copper. 0.000030 (0,75 ) gold over nickel available by adding -14 suffix onto pa rt number. example: fc120n2-14 part number part number wire size awg/(mm 2 ) a b c nominal rating fc112n2 12 (4,0) 12 (4,0) 0.098 (2,49) 0.105 (2,67) 25 amp 25 amp 25 amp 25 amp 0.0625 (1,588) 0.0625 (1,588) 0.0625 (1,588) 0.0625 (1,588) 0.093 (2,36) 0.065 (1,65) 0.081 (2,06) 0.067 (1,70) 0.045 (1,14) 14 - 16 (2,5 - 1,5) 16 - 18 (1,5 - 1,0) 20 - 22 - 24 (0,5 - 0,3 - 0,25) mc112n mc114n mc116n mc120n 14 - 16 (2,5 - 1,5) 16 - 18 (1,5 - 1,0) 20 - 22 - 24 (0,5 - 0,3 - 0,25) fc114n2 25 amp 0.098 (2,49) 0.081 (2,06) 0.105 (2,67) 0.093 (2,36) 0.065 (1,65) 0.067 (1,70) 0.045 (1,14) 25 amp 25 amp 25 amp fc116n2 fc120n2 wire size awg/(mm 2 ) a b nominal rating * female contact closed entry, l.s.a. male contact material: high conductivity copper alloy. finish: gold flash over nickel. c c b b a a 0.142 (3,61) part no. fs4008d fs4012d fs4016d current rating 40 amps 8 0.858 (21,79) 0.219 (5,56) 0.188 (4,78) 0.143 (3,63) 0.1 12 (2,84) 0.069 (1,75) 0.100 (2,54) 0.858 (21,79) 0.858 (21,79) 12 16 20 amps 10 amps wire size a ref. b c part no. ms4008d-858.1 ms4012d-858.1 ms4016d-858.1 current rating 40 amps 8 0.985 (25,02) 0.219 (5,56) 0.188 (4,78) 0.143 (3,63) 0.1 12 (2,84) 0.069 (1,75) 0.100 (2,54) 0.985 (25,02) 0.985 (25,02) 12 16 20 amps 10 amps wire size a ref. b c * female contact closed entry, l.s.a. male contact material: high conductivity copper alloy. finish: gold flash over nickel. a b b a 0.142 (3,61) 0.354 (8,99) 0.354 (8,99) part no. fc4008d fc4012d fc4016d current rating wire size a b 40 amps 8 0.858 (21,79) 0.858 (21,79) 0.858 (21,79) 0.181 (4,60) 0.101 (2,57) 0.067 (1,70) 12 16 20 amps 10 amps part no. mc4008d-858.2 mc4012d-858.2 mc4016d-858.2 current rating wire size a b 40 amps 8 0.985 (25,02) 0.985 (25,02) 0.985 (25,02) 0.181 (4,60) 0.101 (2,57) 0.067 (1,70) 12 16 20 amps 10 amps dimensions are in inches (millimeters) all dimensions subject to change *note: female contacts feature large surface area (l.s.a.) closed entry contact design which provides maximum mating surfaces be tween male and female contact and reduced contact resistance during operation. bmp connector dimensions 3.000 [76.20] 1.167[29.64] 0.961[24.41] 0.681[17.30] 0.540[13.72] 0.462[11.73] 2.375[60.33] 2.375[60.33] 0.876[22.25] 0.876[22.25] 1.530[38.86] 1.530[38.86] 2.680[68.07] 2.680[68.07] 0.230 [5.84] typ. 2 places 0.248[6.30] typ. 2 places typical part number: bmp18w6moel0000 typical part number: bmp18w6fot0000 positronic industries, inc. believes the data contained herein to be reliable. since the technical information is given free of charge, the user employs such information at his or her own discretion and risk. positronic industries, inc. assumes no responsibility for results obtained or damages incurred from use of such information in whole or part. 3014a ubi road 1 #06-07 ?singapore 408703 telephone (65)-842-1419 ?fax (65)-842-1421 e-mail: posiasia@singnet.com.sg zone industrielle est. ?46 route d?ngachies ?f-32020 auch cedex 9 ?france t?l?phone 05 62 63 44 91 ?t?l?copieur 05 62 63 51 17 423 n. campbell ave. ?p.o. box 8247 ?springfield, mo 65801 telephone 417-866-2322 ?fax 417-866-4115 ?toll free 800-641-4054 e-mail: info@positronic.com ?web site: www.positronic.com positronic asia pte ltd. positronic industries, sa. positronic industries, inc. bmp master 6/3/02 10:50 am page 4
positronic industries offers . . . bmp connectors for high voltage / high current and certain ?ot swap?applications materials and finishes: insulator: glass filled polyester, ul 94v-0. contacts: precision machined copper alloy with 0.000010 inch (0.25 microns) gold over nickel, or 0.000030 inch (0,8 microns) gold over nickel. hood: aluminium, yellow anodize. shell: aluminium, yellow anodize. mounting plate: aluminium, yellow anodize. electrical characteristics: connector contact current rating: see inside for performance curves. size 16 contact: 15 amperes nominal continuous, derated per iec 512-3, test 5b. size 8 contact: 40 amperes nominal continuous, derated per iec 512-3, test 5b. ?ot swap?for certain applications. initial contact resistance: size 16 contact: 0.003 ohms max., per iec 512-2, test 2b. size 8 contact: 0.005 ohms max., per iec 512-2, test 2b. insulation resistance: 5 g ohms per iec 512-2, test 3a, method a. voltage proof: 2000 vrms per iec 512-2, test 4a, method c. creepage distance: 0.157 inch (4 mm) minimum. clearance distance: 0.125 inch (3,2 mm) minimum. working temperature: -55? to +125?. working voltage: designed to meet ul 600vac and csa 600vac. mechanical characteristics: removable contacts: insert contact to rear face of insulator; release from front face of insulator. size 16 contact: male contact has a 0.062 inch (1,57 mm) diameter. female contact has ?losed entry?design for highest reliability and current carrying capacity. size 8 contact: male contact has a 0.142 inch (3,61 mm) diameter. female contact has ?losed entry?design for highest reliability and current carrying capacity. contact retention in insulator: size 16 contact: 15 lbs. (67n) per iec 512-8, test 15a. size 8 contact: 22 lbs. (98n) per iec 512-8, test 15a. contact terminations: crimp or solder removable contacts. size 8 contacts for wire sizes 8 to 16 awg. size 16 contacts for wire sizes 12 - 24 awg. straight dip solder printed board mount contacts optional, with 0.062 inch (1,57 mm) diameter for size 16 contacts and 0.125 inch (3,18 mm) diameter for size 8 contacts. contact insertion and withdrawal forces: size 16 contact: 8 oz. (2,2 n) nominal per contact. size 8 contact: 40 oz. (11n) nominal per contact. locking system: jackscrews. polarizations: provided in insulator design and polarized shell. mechanical operations: 500 operations per iec 512-5. blind mating: provided in insulator design, optional. technical characteristics an iso 9001 certified company positronic industries is pleased to present the bmp con- nector which is designed as a power interface connector for high voltage/high current applications. this connector is offered with four standard mounting options which allow for cable-to-cable and cable-to-panel connections. the bmp connector features positronic s ?arge surface area contact mating system, with high reliability ?losed entry?design female contacts. the bmp connector is also designed with raised bosses on the insulator which improve high voltage capabilities and prevent accidental operator exposure to live contacts. polarization and blind mating capabilities are options designed into the insulator of the bmp connector. contacts for the bmp connectors are sold separately. the standard contacts for bmp connectors are size 8 and size 16 crimp or solder removable contacts. contact combinations can handle 8 to 24 awg size wire. size 16 contacts are rated for 25 amperes per contact and size 8 contacts are rated for up to 40 amperes per contact. coaxial contacts are also available; con- sult the factory for special ordering information. positronic industries offers a full range of crimp tools for use with the bmp crimp contacts. consult positronic s heavy-duty rectangular connector catalog or the factory for additional tool- ing information. other combinations of power and signal contacts are avail- able on special order to satisfy special customer requirements. bmp series contact ordering information note: contacts are not supplied with the bmp-series connectors and must be ordered separately. size 16 crimp contacts size 8 removable power crimp contacts size 8 removable power solder contacts * female contact closed entry, l.s.a. male contact 0.766 (19,46) 0.766 (19,46) 0.062 (1,57) 0.250 (6,35) c b a 0.250 (6,35) 0.062 (1,57) b a 0.020 0.020 0.020 0.010 0.001 0.003 0.003 0.020 0.010 0.003 0.003 material: copper alloy. finish: 0.000010 (0,25 ) gold over nickel or copper. 0.000030 (0,75 ) gold over nickel available by adding -14 suffix onto pa rt number. example: fc120n2-14 part number part number wire size awg/(mm 2 ) a b c nominal rating fc112n2 12 (4,0) 12 (4,0) 0.098 (2,49) 0.105 (2,67) 25 amp 25 amp 25 amp 25 amp 0.0625 (1,588) 0.0625 (1,588) 0.0625 (1,588) 0.0625 (1,588) 0.093 (2,36) 0.065 (1,65) 0.081 (2,06) 0.067 (1,70) 0.045 (1,14) 14 - 16 (2,5 - 1,5) 16 - 18 (1,5 - 1,0) 20 - 22 - 24 (0,5 - 0,3 - 0,25) mc112n mc114n mc116n mc120n 14 - 16 (2,5 - 1,5) 16 - 18 (1,5 - 1,0) 20 - 22 - 24 (0,5 - 0,3 - 0,25) fc114n2 25 amp 0.098 (2,49) 0.081 (2,06) 0.105 (2,67) 0.093 (2,36) 0.065 (1,65) 0.067 (1,70) 0.045 (1,14) 25 amp 25 amp 25 amp fc116n2 fc120n2 wire size awg/(mm 2 ) a b nominal rating * female contact closed entry, l.s.a. male contact material: high conductivity copper alloy. finish: gold flash over nickel. c c b b a a 0.142 (3,61) part no. fs4008d fs4012d fs4016d current rating 40 amps 8 0.858 (21,79) 0.219 (5,56) 0.188 (4,78) 0.143 (3,63) 0.1 12 (2,84) 0.069 (1,75) 0.100 (2,54) 0.858 (21,79) 0.858 (21,79) 12 16 20 amps 10 amps wire size a ref. b c part no. ms4008d-858.1 ms4012d-858.1 ms4016d-858.1 current rating 40 amps 8 0.985 (25,02) 0.219 (5,56) 0.188 (4,78) 0.143 (3,63) 0.1 12 (2,84) 0.069 (1,75) 0.100 (2,54) 0.985 (25,02) 0.985 (25,02) 12 16 20 amps 10 amps wire size a ref. b c * female contact closed entry, l.s.a. male contact material: high conductivity copper alloy. finish: gold flash over nickel. a b b a 0.142 (3,61) 0.354 (8,99) 0.354 (8,99) part no. fc4008d fc4012d fc4016d current rating wire size a b 40 amps 8 0.858 (21,79) 0.858 (21,79) 0.858 (21,79) 0.181 (4,60) 0.101 (2,57) 0.067 (1,70) 12 16 20 amps 10 amps part no. mc4008d-858.2 mc4012d-858.2 mc4016d-858.2 current rating wire size a b 40 amps 8 0.985 (25,02) 0.985 (25,02) 0.985 (25,02) 0.181 (4,60) 0.101 (2,57) 0.067 (1,70) 12 16 20 amps 10 amps dimensions are in inches (millimeters) all dimensions subject to change *note: female contacts feature large surface area (l.s.a.) closed entry contact design which provides maximum mating surfaces be tween male and female contact and reduced contact resistance during operation. bmp connector dimensions 3.000 [76.20] 1.167[29.64] 0.961[24.41] 0.681[17.30] 0.540[13.72] 0.462[11.73] 2.375[60.33] 2.375[60.33] 0.876[22.25] 0.876[22.25] 1.530[38.86] 1.530[38.86] 2.680[68.07] 2.680[68.07] 0.230 [5.84] typ. 2 places 0.248[6.30] typ. 2 places typical part number: bmp18w6moel0000 typical part number: bmp18w6fot0000 positronic industries, inc. believes the data contained herein to be reliable. since the technical information is given free of charge, the user employs such information at his or her own discretion and risk. positronic industries, inc. assumes no responsibility for results obtained or damages incurred from use of such information in whole or part. 3014a ubi road 1 #06-07 ?singapore 408703 telephone (65)-842-1419 ?fax (65)-842-1421 e-mail: posiasia@singnet.com.sg zone industrielle est. ?46 route d?ngachies ?f-32020 auch cedex 9 ?france t?l?phone 05 62 63 44 91 ?t?l?copieur 05 62 63 51 17 423 n. campbell ave. ?p.o. box 8247 ?springfield, mo 65801 telephone 417-866-2322 ?fax 417-866-4115 ?toll free 800-641-4054 e-mail: info@positronic.com ?web site: www.positronic.com positronic asia pte ltd. positronic industries, sa. positronic industries, inc. bmp master 6/3/02 10:50 am page 4
|
